This link is only for people located in USA, order will be sent from California. If you want to buy together with other models, please make sure they are all shipped from USA.
1. Emitter: C8G used Luminus SST40 LED output max 2000lumens.
2. Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized anti-abrasive finish to get solid built body.
3. Advanced Temperature Regulation (ATR) technology: ATR will adjust the brightness level automatically when the driver temperature reaches 50℃ (122 °F) to prevent overheating.
4. Power display: The LED indicator shows power status for 5 seconds when it turns on.
Green when power is good enough, red when short, red flashes when the power goes out.
The flashlight will turn off automatically when the voltage is lower than 2.7 volts, please recharge battery or insert a new battery.
5. Operation Instruction:
The tail switch is the tactical switch, and the side switch is the functional switch.
Tap the tactical switch to momentarily turn on the light; release it and the light will go out. Fully press the tactical switch to constantly turn on the light; press once again to turn off the light.
Group 1: With the light switched on, single click the functional switch to cycle through Low→Med→High..A fast double click actives turbo mode,as soon as the Temperature on the driver reaches on 50 Celsius, there is a stepdown to high mode.
Group 2: With the light switched on, press and hold the switch switch to ramp up and down. The range is 10LM - 2000LM, it blinks when reaching max or min brightness. Ramping changes direction when press button again within 1.5 seconds, same direction when ramping again after 1.5 seconds.A fast doubleclick directly ramps to turbo mode,as soon as the Temperature on the driver reaches on 50 Celsius, there is a stepdown to high mode.
With the light switched on, 3 fast clicks to activate Strobe mode, press and hold to cycle through Strobe-Beacon-SOS, single click goes back to normal brightness.
With the light switched on, 4 fast clicks change Group 1 to Group 2.
With the light switched off, press and hold side switch and click tail switch to activate Eco mode.
Mode memory:brightness levels will be maintained,it turns on with the remembered mode.
||Ramping: from 10 lm to 2000 lm
||6 min (Turbo) + 1h 40 min (High)
||4 h 50 min
||6 h 30 min
||1 meter / 3.28 feet
||IPX8 (2 meters / 6.56 ft depth)
Notice: The above mentioned parameters are based on tests according to international flashlight testing standards (ANSI/NEMA FL1) using one 4000 mAh 21700 Li-ion battery in our laboratory. Results may vary with different battery or under different environmental conditions.