banner图

Product

Sofirn SP31 V2.0 Flashlight

  • Parameter
  • Video
  • Instructions
  • Evaluating
  • Download

SP31v2.0 is a tactical LED Flashlight.

Technical Parameters

Modes

Turbo

High

Medium

Low

Eco

Strobe

SOS

Brightness

1200lm

500lm

160lm

50lm

5lm

1200lm

50lm

Running Time

2hr37min

3hr41min

9hr45min

26hr49min

291hr

--

--

Distance

225Meter

150Meter

84Meter

49Meter

15.8Meter

--

--

Intensity

12707cd

5647cd

1767cd

595cd

62cs

--

--

Impact Resistant

1 Meter

Water Resistant

IPX8, underwater 2 Meter (Not for   diving)

Notes

Note: The running time may vary according to   usage, batteries and environment. Above Turbo is   tested under temperature regulation.

We tested flashlight in lab by premium 3500mAh 18650 protected   battery.

And the operation temperature is 0℃-40℃.

 



 

 

 

 

 

 


Choose Modes:

1, one click to adjust one mode. It cycles from Eco-- Low --Medium--High --Turbo --Eco;

2, Press 1.2 seconds to active Strobe, and one click again to active SOS; it cycles SOS-- Strobe-- SOS; press 1.2 seconds again to returns to common modes

3, Memory function: It work for Eco/ Low / Medium / High/ Turbo (Strobe or SOS cannot be memorized)









 

 

 

 

 

Technical Parameters

*Cree XPL-HI V3 LED

*Voltage: 2.8-6.6 volts

*Battery Supported: single 18650 or 2*CR123A li-ion batteries

*Dimension: 133.5mm(length)× 23.4mm(head)

Net Weight: 72±1 gram (no batteries included)

Made by Aircraft 6061 grade-aluminum alloy, Premium type Ⅲ hard-anodized anti-abrasive finish to get solid built body, anti-crash.

Toughened glass lens with purple AR coating; Smooth Reflector

*Mode Memory: It memorizes the last brightness level used in the general modes, but it does not remember the Strobe mode. It will activate the last brightness you selected, when you turn on the flashlight next time.

*Reverse polarity protection: to protect from improper battery installation

*constant current output is adopted

Advanced temperature regulation (ATR) technology

It adjusts the brightness level automatically when the driver temperature reaches 60℃ to keep the light from overheat.

Automatic Stepdown:

Turbo steps down to High after working for 3 minutes to avoid overheat. The ART works if the drivers reaches 60℃.

Low voltage warning

It is lower than 3.1 volts if the LED Red indicator (on the side switch) flashes rapidly when you turn on. Then please recharge the battery.

Low Voltage Protection:

If the voltage is lower than 3.0 volt when turn on, automatic stepdown works. so it keeps stepping down to the lowest mode and runs out power juice. Please insert new battery if you get this signal.

Battery Capacity Indicator (LED on the side switch)

The indicator is on for 5 seconds every time when light turns on. It shows green or red to indicate the battery power.

Steady Green: enough power

Steady Red: short of power

Flashing Red: running out of power. Please insert a new battery!